[WriteLog] WKUSB & Writelog

Kostas SV1DPI sv1dpi at otenet.gr
Sun Nov 4 04:25:44 EST 2012

My winkeyer2 works fine with writelog. I don't remember if i did 
something special during setup. But with this chance i will come back to 
that: It is at least silly that we need to edit the ini file for many 
things. Authors of writelog must think abt it and solve this problem 
_first of all. _The easiest solution would be to make a 3rd program with 
all initial settings and the user check boxes. This program will 
configure the ini file. Of course the best is this initial setup screen 
be part of the writelog and the changes can be made without restarting 
the program. A modern software can not ask from his users to edit an ini 
file. At least this is my opinion....
73 Kostas sv1dpi

???? 3/11/2012 5:05 ??, ?/? Noel Zeibari ??????:
> Thank you, to all who responded to help. I was not aware that there was some
> Winkeyer2 entries in the .ini file until Jim N7US pointed it out to me.
> So I copied most of what I need from the HELP FILES! to my .ini files.
> Now I'm able to send canned messages ok except for minor problems, the spacing is
> ok at speeds over 28 wpm, if I drop the speed to 25-26 wpm there is a big gap in spacing.
> So far no matter what I did, can't narrow the space, also, I can not control the speed when sending with
> the paddles, either from the speed pot or the key board.
> At my age I'm ok with 22 wpm speed with the paddles. Guess I'll have to use the key board for filling.
> Best regard, Noel (OM) N3NZ
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

More information about the WriteLog mailing list