[WriteLog] [PstRotator] Re: Newbie question PstRotatorAZ

[Gary AL9A]

Hans,

Alt+A eh.  I think I can rememger that one.  Thanks.

73,
Gary AL9A



----- Original Message ----- 
From: "Radio Station K0HB" <kzerohb at gmail.com>
To: "Gary AL9A" <al9a at mtaonline.net>
Cc: "WriteLog Reflector" <writelog at contesting.com>
Sent: October 25, 2012 5:28 PM
Subject: Re: [WriteLog] [PstRotator] Re: Newbie question PstRotatorAZ


In clarification of my earlier, the rotor turns only on occasion of <alt-a>, 
not on every call entry.

73,

de Hans, K0HB
--
"Just a boy and his radio"


On Oct 25, 2012, at 20:08, "Gary AL9A" <al9a at mtaonline.net> wrote:

> Hans has made a timely posting, at least for me.  I have never had my 
> rotor, a Create Design RC5A, interfaced to WL because it is too old and 
> the controller lacks the communication ability.  The rotor is still going, 
> but my control box is beginning to show its age and is giving me problems. 
> I am considering replacing it with the Green Heron RT-21 which would allow 
> me to interface the control box with WL.  It uses a "superset" of the 
> DCU-1 protocol so I should be able to define it correctly to work in WL.
>
> My question is after getting the rotor interfaced to WL, how do I control 
> it?  I haven't found anything in the Help manual yet about sending 
> commands from WL to the controller.  I wouldn't want the rotor to start 
> turning to a different direction each time I enter a call with a different 
> beam heading, but how is this controlled from the program?  Any help 
> before I slap my credit card on the counter would be appreciated.
>
> 73,
> Gary AL9A
>
>
> ----- Original Message ----- From: "Radio K0HB" <kzerohb at gmail.com>
> To: <PstRotator at yahoogroups.com>; "WriteLog Reflector" 
> <writelog at contesting.com>
> Sent: October 25, 2012 11:31 AM
> Subject: Re: [WriteLog] [PstRotator] Re: Newbie question PstRotatorAZ
>
>
>> And nothing happens.
>>
>> I have set up first PstRotatorAZ, clicked “Tracking”, and selected 
>> WriteLog from tracker list.  A small “DDE” window is opened.
>>
>> Then opened WriteLog to setup new contest (CQWW DX).  In setup of 
>> rotator, selected “MSG” and “Sartek” as shown on page 28.
>>
>> Now, from main Writelog operating screen, nothing seems to affect the 
>> rotator.  (Previously <alt-a> would set rotor bearing)
>>
>> What next?
>>
>> 73, de Hans, K0HB
>> --
>> "Just a boy and his radio"
>> --
>> Proud Member of:
>> A1 Operators - http://www.arrl.org/a-1-op
>> Minnesota Wireless contesters - http://www.W0AA.org
>> Arizona Outlaws contesters - http://www.arizonaoutlaws.net
>> Twin City DX Assn - http://www.tcdxa.org
>> Lake Vermilion DX Assn - http://www.lvdxa.org
>> CWOps - http://www.cwops.org
>> SOC - http://www.qsl.net/soc
>> Twin City FM Club - http://tcfmc.org
>> --
>> Superstition trails --> http://oldslowhans.wordpress.com/
>> Sea stories here ---> http://k0hb.wordpress.com/
>> Request QSL at ---> http://www.clublog.org/logsearch/K0HB
>> All valid QSL requests honored with old fashioned paper QSL!
>> LoTW participant
>>
>>
>> From: Codrut
>> Sent: Thursday, October 25, 2012 6:44 PM
>> To: PstRotator at yahoogroups.com
>> Subject: [PstRotator] Re: Newbie question
>>
>> The answer is yes. You can find how to set Writelog to communicate with 
>> PstRotatorAz in the User Manual (Help / User manual), page 28.
>>
>> --- In mailto:PstRotator%40yahoogroups.com, "K0HB" <kzerohb at ...> wrote:
>>>
>>> Please excuse questions from a FNG at the foot of the steep part of the 
>>> learning curve. Just bought and registered PstRotatorAZ this afternoon.
>>>
>>> My two logging programs are WriteLog for contesting and CommCat for 
>>> general purpose logging.
>>>
>>> My rotor is a Tailtwister, using Rotor-EZ from Idiom Press.
>>>
>>> The documentation for PstRotator tells me that it will interface with 
>>> (for example) Writelog.
>>>
>>> Now WriteLog already can run my Rotor-EZ (just press <alt-a> and 
>>> WriteLog sends new bearing to Rotor-EZ.
>>>
>>> I have other reasons for using PstRotatorAZ, but wondering what (if any) 
>>> additional function does PstRotatorAZ throw into the mix beyond the 
>>> native WriteLog capability?
>>
>>
>>
>> __._,_.___Reply via web post  Reply to sender  Reply to group  Start a 
>> New Topic  Messages in this topic (2)
>>
>> Recent Activity: a.. New Members 4
>> Visit Your Group
>> Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use • Send us 
>> Feedback .
>>
>> __,_._,___
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/