[WriteLog] 2 Tone Works Now MMTTY Doesn't

[Joe Subich, W4TV]

> Now, when open the "TU type" and check "XMMT.ocx", one of the two 2
> Tone windows closes and then reopens on top of the other 2 Tone
> window. Do not get the "Setup XMMT.ocx" window. So what did I delete
> that I shouldn't have or is there something else needs to be done?

*Every* instance of MMTTY and 2Tone must be in its own directory and
each RTTYrite Window (Radio 1, Radio 2, Clone, etc.) must refer to
a different directory.

The [RTTYrite], [RTTYrite2],  [Rttyrite=Clone#], and [Rttyrite2-Clone#]
sections contain location and size information for the RTTYrite windows.
*HOWEVER* the location for the MMTTY and 2Tone tuning displays/control
panels is stored in the ini file *in each MMTTY/2Tone directory*.

If you try to run multiple MMTTY or 2Tone instances from the same
directory *they will open on top of each other*.

You want to create *at least* two MMTTY directories and two 2Tone
directories - that will allow a combination of four decoders - Main
and Sub Rx or Radio 1 and Radio 2 each with one Clone window.  If
you need more Rttyrite windows, you must create more directories for
MMTTY and/or 2Tone.

*DO NOT* try to share the same MMTTY directory between the old plug-in
and the new XMMT.ocx interface.  IMO, the old plug-in should be
uninstalled - it is too limited and unreliable compared to XMMT.ocx
when XMMT.ocx is properly configured.

73,

    ... Joe, W4TV


On 4/2/2013 9:47 PM, Mike wrote:
> Hello,
>
> Got 2 Tone working in a single computer SO2R setup (MS XP) after deleting
> the MMTTY from Writelog.ini, "RttyRite", "CustomTnc1MenuEntry=" and
> CustomTnc1Progld=".  "MMTTY_LOCATION=C\Program Files\2Tone\2Tone.exe" is
> now in the Writelog.ini.  Unfortunately, can't get to MMTTY using XMMT.ocx
> via WL, Rttyrite window TU type and clicking on XMMT.ocx.
>
> Now, when open the "TU type" and check "XMMT.ocx", one of the two 2 Tone
> windows closes and then reopens on top of the other 2 Tone window.  Do not
> get the "Setup XMMT.ocx" window.  So what did I delete that I shouldn't
> have or is there something else needs to be done?  One possibility would be
> to change the "MMTTY_LOCATION=...." to the location of the MMTTY.exe file.
> However, thought one could switch back to MMTTY by opening up the "Setup
> XMMT.ocx" window and selecting the path to to MMTTY.exe.  Is my thinking
> skewed regarding how to change TU type via the XMMT.ocx>Setup XMMT.ocx
> window?
>
>    73,
>    Mike, K4GMH
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>