[WriteLog] [RTTY] 75 baud question

[Jay WS7I]

Joe-

Thanks and Ron has it going.  He had a bad 9 to 25 pin cable to the 
computer.  Appreciate everyone's input.

73 Jay WS7I

On 4/24/2013 5:02 PM, Joe Subich, W4TV wrote:
>
> TS-850 has a separate RCA jack (marked RTTY) for FSK input. Constant
> level receive audio is available on pin 3 of ACC2 (the 13 pin DIN)
> with return ("ground" on pin 4).  PTT for RTTY/FSK is available on
> pin 13 and PTT for AFSK is available on pin 9 (PKS).
>
> The TS-850 expects the "RTTY" jack to be open in MARK and shorted in
> SPACE.  Default shift is 170 Hz, Default tones are "High tones" -
> 2125/2295 Hz.  Those settings can be change via the power-up menu:
> #11 is REVERSE (MARK/SPACE), #12 is shift (170, 200, 425, 850),
> and #13 is High/low tones.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 4/24/2013 4:36 PM, Jay WS7I wrote:
>> Ron K5DJ is working on interfacing his ST-8000 to his Kenwood 850. Can
>> anyone assist Ron?  I don't have a 850 manual anymore and think we has
>> it receiving okay but doesn't appear that FSK is working nor PTT.
>>
>> ST-8000 end is easy enough just can't remember a thing about the 850.
>>
>> He wants to run some 75 Baud for the BARTG.
>>
>> If you don't have his email shoot me your phone and I'll relay and have
>> him call ya.
>>
>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>