[WriteLog] WAE Cabrillo missing first letter of call in QTC's SOLVED

[Gert Meinen]

TNX Gary, 

Just run some tests and found that if I insert a space between the time and
the call, and between the call and the exchange number of the QTC, the
Cabrillo file is showing ok. Guess I was just being lazy and expecting
Writelog to sort things out. Something to remember for the next WAE contest.

73 Gert, PA3AAV

-----Oorspronkelijk bericht-----
Van: WriteLog [mailto:writelog-bounces at contesting.com] Namens Gary AL9A
Verzonden: maandag 12 augustus 2013 21:57
Aan: writelog at contesting.com
Onderwerp: Re: [WriteLog] WAE Cabrillo missing first letter of call in QTC's

Gert,

I'm also running WL V11.12D, but do not see the problem with the first 
letter of the QTC missing.  All of my QTCs have the first letter of the call

in place.  The letter T in a serial number being changed to a number 0 in 
the QTCs in the Cabrillo file is normal and not a problem  The WAE robot has

accepted my Cabrillo log with a problem.

There were a few emails during the contest from a US ham (whose call I 
cannot remember now) who was having a problem with the entire first QTC from

a sent block not printing in the Cabrillo file.  He later discovered that a 
change he had made to his Contest Exchange Format screen was the culprit and

setting it back to the original settings made things right again.  Other 
than that I have no idea why you are getting the results you are seeing.

73,
Gary AL9A

-----Original Message----- 
From: Gert Meinen
Sent: August 12, 2013 1:02 AM
To: 'Gert Meinen' ; writelog at contesting.com
Subject: Re: [WriteLog] WAE Cabrillo missing first letter of call in QTC's

In the QTC's the letter T in the call is converted to number 0 as well...

-----Oorspronkelijk bericht-----
Van: WriteLog [mailto:writelog-bounces at contesting.com] Namens Gert Meinen
Verzonden: maandag 12 augustus 2013 8:26
Aan: writelog at contesting.com
Onderwerp: [WriteLog] WAE Cabrillo missing first letter of call in QTC's

Using Writelog version 11.12D



I noticed that the first letter of the received call in the QTC is missing
when the Cabrillo file is created.

No changes made, just used the standard setup. Anyone sees this too?  Any
fix?



Gert, PA3AAV

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/