[WriteLog] RTTY with Rigblaster Advantage

[Jay WS7I]

Sort of correct.

http://www.westmountainradio.com/content.php?page=com_port_splitter

I would contact the support person Sholto K7TMG for Moutain West Radio 
and see if this new splitter might work.  Haven't tried it myself as my 
Rigblaster Advantage is up on my remote.  I also have lots of com ports 
and plenty of Max232 chips so never tested it with my FT-1000D when I 
had it hooked up here.  Does FSK and CW just fine tho.

I do know that this change has fixed HRD problems.

73 Jay






On 12/12/2013 9:14 PM, Joe Subich, W4TV wrote:
>
> Rigblaster Advantage has a *single* serial port.  That port can
> be used for rig control (TxD/RxD), PTT (RTS) and CW (DTR) or it
> can be used for RTTY (FSK=DTR, PTT=RTS) *but not both*.
>
> If you are going to use RigBlaster Advantage for rig control and
> RTTY, you must use AFSK (audio) for RTTY transmit.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 12/12/2013 11:33 PM, Andre VanWyk wrote:
>> I would very much like to hear from someone using writelog with a 
>> Rigblaster advantage for both RTTY and rig control.
>>
>> I am having a hard time with port settings and would like to get some 
>> pointers from someone using this setup.
>>
>> 73
>> NJ0F
>>
>> Sent from my iPhone
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/