[WriteLog] Need to talk to ICOM 706MK2G

[Gary AL9A]

Russell,

WriteLog only has one driver for the IC-706, with the original 706 hex 
address.  In your writelog.ini file go to the [RIGS] section and add the 
following line:

Icom IC-706=0x58

This changes the default hex address of the original IC-706 in the radio 
driver to the hex address used by your MK2G.  Leave the radio address set to 
the default in case other programs look for that info when using them.  This 
change to your ini file only affects the way WriteLog interacts with the 
radio.

73,
Gary AL9A



----- Original Message ----- 
From: "Russell Blair" <russell_blair86 at yahoo.com>
To: <writelog at contesting.com>
Sent: January 13, 2013 2:42 PM
Subject: [WriteLog] Need to talk to ICOM 706MK2G


I am looking for the INI file for writelog 11.08B to check the setting so I 
can get the program to talk to my ICOM 706MK2G. Now the program can't get 
the frequency on Comm port 1 to
input it in the log, Comm port 2 is used for CW PTT. that work very well. So 
I need some help in finding where and under what name is the INI file.
My ICOM 706MK2G uses hex 58 to commuacate to the radio.

Thanks Russell NC5O

" IN GOD WE TRUST "
" Skype-Russell.Blair "
"God's law is set in stone..everything else is negotiable."
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2890 / Virus Database: 2638/6030 - Release Date: 01/13/13