[WriteLog] % L in rtty F key memory not working

[Gary AL9A]

Jim,

I just knew someone would pop in with the answer for your K3 setup.

By the way, since you are new to WL I forgot to mention a feature that may 
be useful to you.  In the Entry window all the field names are shown in 
raised buttons.  These buttons can be programmed with additional messages, 
including macro commands that can then be played back by a left click on the 
field button name.  In the BARTG RTTY Sprint there are 4 buttons - CALL, NR, 
Country and C.  Each of these can be programmed with its own message.

To program a key hold down the Shift key and left click on the button.  When 
the little window box opens type in the commands and or text you want 
connected with this button.  For instance the CALL button could be 
programmed to send CALL? %E.  To complete the button program hit Enter.  Now 
if you need a repeat of a call just left click on the CALL button to send 
CALL?.  Just remember in RTTY put a %E at the end of each message button, 
just like in the normal F key macros to turn off TX.  Once you have the 
buttons programmed do a Setup/Save Configuration and a File/Save to save the 
program messages.

73,
Gary AL9A



----- Original Message ----- 
From: "Ed Muns" <w0yk at msn.com>
To: "'Jim Balls'" <makidoja at gmail.com>
Cc: <writelog at contesting.com>
Sent: January 23, 2013 5:44 PM
Subject: Re: [WriteLog] % L in rtty F key memory not working


> Yes.
>
> Select 2 for Number of Radios in the Radio menu.  This will create two 
> Entry
> windows.
> In the Setup menu select Ports and setup two instances of the K3 on the 
> same
> COM port where your K3 is connected.
> In the Radio button in the upper Entry window, click the drop-down menu in
> Log the frequency of QSOs, and select the Comm port entry.
> In the Radio button in the lower Entry window, do the same thing but 
> select
> Comm port Rig 2.
>
> When the TX focus is on the lower (sub-RX) Entry window, WriteLog puts the
> K3 in SPLIT mode so you can transmit there.  For RTTY FSK, this means 
> you'll
> need two FSK keying interfaces, each on a different Com port and each of
> those Com ports associated with different Rttyrite windows with MMTTY or
> whatever software modem you use.  Same thing for hardware TNCs.  For CW, 
> if
> you use the K3 COM port keying on the DTR (or, RTS) signal, then you can
> just tick the CW button in the Ports menu for both K3 entries.  If a 
> WinKey
> or MicroHAM box or other keyer, just specify its COM port as a third COMn
> entry in the Ports window.
>
> All this is explained in the Help file.  Search on K3.
>
> Ed W0YK
>
>
>
> Jim M0CKE wrote:
>> One more question. Any idea how to use the k3 dual rx with 2
>> log entry windows, is it a case of putting 2 entries of k3
>> with the same con port in the com port setup
>>
>> Also can additional commands be sent to the k3 for things
>> like rit cancel when f1 is sent (cq).
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2890 / Virus Database: 2639/6052 - Release Date: 01/23/13
>