[WriteLog] WriteLog 11.10 Release

[Steve AI9T]

Ed

Never mind I found out how to get to the XMMT.ock setup. Now I have to 
figure out how to get them both to run together. I will tackle that 
tomorrow.

Thanks for your help

Steve AI9T


On 3/30/2013 11:10 PM, Steve AI9T wrote:
> Ed
>
> I'm having the same problem even after removing the rttyrite 1 and 2 
> sections from the ini file. I see the xmmt.ocx in the TU Type after I 
> restart WL. I can check it but it does not open a windows that allows 
> me to register the file. If I pick MMTTY then close the MMTTY window 
> and reopen the TU type is empty again.
>
> I already had a 2 tone folder in my Ham Programs folder for N1MM. I 
> put the XMMT.ocx file in my WL programs folder.
>
> Steve
>
> On 3/30/2013 10:40 PM, Ed Muns wrote:
>> Go into writelog.ini and delete the [Rttyrite] and [Rttyrite2] sections.
>> These were made with a prior version of WriteLog and may be causing the
>> problem.  Then open WriteLog and setup your Rttyrite window again.  
>> The TNC
>> menu should have both MMTTY and XMMT.ocx items to choose from. Choosing
>> MMTTY will use the MMTTY Plug-in you already have installed. Choosing
>> XMMT.osx will bring up a window offering to Register xmmt.osx and 
>> asking for
>> the path to where you have it stored.  Once that finishes, you will 
>> have the
>> xmmt.osx window in which you put the path to mmtty.exe or 2tone.exe.
>>
>> But before these latter steps can occur you need to do more than just
>> upgrade to WriteLog 11.10G.  You must store xmmt.osx wherever you 
>> choose on
>> your computer and also 2tone.exe plus 2tone.ini.  On Vista and later
>> operating systems, you probably don't want to put these 2Tone files 
>> in the
>> Program Files directory.  For some reason, I've found the virtual store
>> mechanism to seldom work with 2Tone and you want the ini file to be 
>> updated
>> with your configuration choices and window position.  So put them in 
>> a 2Tone
>> directory under Program Data or most anywhere but not Program Files 
>> which
>> Windows doesn't allow direct writing to.
>>
>>
>> Ed W0YK
>>
>>
>> Steve AI9T wrote:
>>> Installed the latest version. Opened Writelog,, and right
>>> clicked on Call entry window,, then RTTY view. RTTYrite and
>>> MMTTY plugin window open. Then I click on TU Type and there
>>> is nothing in the dropdown and Writelog freezes up. Have to
>>> close via task manager.
>>>
>>> Running windows 7 64 bit
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
>

-- 
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)