[WriteLog] Need help getting my FTDX-5000 to speak on the CAT with WL v11 and Microham USB device.

[Joe Subich, W4TV]

See the example configuration for WriteLog and your microHAM interface
available in Router (Help | Download Documents) or in the section for
your interface on-line at www.microHAM-USA.com/support.html.

If you have USB Interface II, USB Interface III, CW Keyer, Digikeyer
or Digikeyer II, make sure you have set the jumpers for the correct
levels (RS-232) as shown in the appropriate Users Manual.

73,

    ... Joe, W4TV


On 11/21/2013 6:22 PM, Magnus Aronsson wrote:
> Hi
> Trying to prepare for CQWW-CW and can not get my rig control to work
> with my laptop and Writelog v11.
> I use a  USB keyer from Microham and have created COM port 1 and 2.
>
> Use Com 1 for rig control and Com 2 for CW.
>
> Set the rig in writelog for FTDX-5000.
>
> CW transmit is working and I switched CW transmit between both port 1
> and port 2 so ports are working - problem is, I do not get Writelog and
> FTDX-5000 to speak to eachother with the CAT.
>
> Any advice is most welcome.
>
> 73 de Magnus SM6WET
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>