[WriteLog] Writelog with Power SDR/IF and LP-PAN

[Steve Dyer W1SRD]

You don't need LP-Bridge running to use an LP-PAN.
I use the 2nd CAT port from the microHAM router for NaP3.
Works great with Writelog during contests.
73,
Steve
W1SRD
>
>> What I wondered was basically if anyone on the reflector is using
>> LP-Pan in association with Writelog. Ideally I'm particularly
>> interested in persons using microHam keyers as their interfaces.
>
> Fugedaboutit ... LP-Bridge typically screws up both microHAM Router
> and several common loggers - I don't know about WriteLog specifically 
> but I do know of at least three developers who will not even accept
> bug reports if LP-Bridge is running.
>
> Which transceiver were you planning to use?
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 10/14/2013 9:02 AM, Dean St. Hill wrote:
>> Fellow Hams
>>
>> I have been trying to gather as much information as possible 
>> regarding the
>> use of LP-Pan and the various associated hardware and software. I've 
>> taken
>> the plunge and acquired all the necessary hardware but thought I'd 
>> better
>> send out an SOS before commencing the project - which in any event 
>> will be
>> post CQWW as I don't want to mess up my current configuration.
>>
>> What I wondered was basically if anyone on the reflector is using 
>> LP-Pan in
>> association with Writelog. Ideally I'm particularly interested in 
>> persons
>> using microHam keyers as their interfaces.
>>
>> At this stage I probably don't know enough to even know what questions I
>> should be asking so I'll leave it there until I get a few responses.
>>
>> Thanks!!!
>>
>>
>> 73's - Dean - 8P6SH
>>
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/