[WriteLog] MicroKeyer II CW Problem - Continuous Keying

[Joe Subich, W4TV]

Check the *PTT* Port - make sure you have not assigned any port
for PTT (or have not assigned it to the same port as you are
using for the radio).

Writelog sets DTR and RTS high by default on most rig drivers -
if you are not using them for CW/PTT (PC Generates).  If you have
selected PTT on the rig port in Router ....

73,

    ... Joe, W4TV


On 10/28/2013 4:12 PM, Richard Thorne wrote:
> I'm cross posting to see if someone else has noticed this and has a
> solution.
>
> I'm setting up Writelog 11.14b for Nov. SS CW.
>
> I have com5 selected in the Microkeyer Router for cw and use the same in
> Writelog to communicate with K1EL.
>
> As soon as I apply this setup in Writelog my K3 starts transmitting a
> continuous carrier.
>
> Has anyone else had or is having this problem?
>
> Thanks
>
> Rich - N5ZC
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>