[WriteLog] K3 messages for 10 meter

[Alan Maenchen]

I managed to setup the K3 DVK so it works with WL. It's actually working
very well but has two problems:

1)  For CW, F1-F4 also evoke the K3 memory, and I can't setup the CW
memories (M1-4) in the K3 without causing gibberish. Can WL distinguish
between CW and SSB such that the K3 memories are ONLY envoked for SSB?

I can probably get around this by NOT using F1-F4 for CW but old habits die
hard.

2)  Hitting ESC will NOT stop the K3 memory sending. If I hit the wrong key
by mistake, I have to reach over and hit the K3 REC button .. awkward and
usually too late. It isn't often that I make that mistake, but I do like to
record a long CQ and use ESC to truncate at the proper time. However, ESC
doesn't work when using the K3 DVK.  Is there a way to either make ESC work
with the K3 memory or some other keyboard key?

Here's what I have in the ini:
[Elecraft_K3_commands]
Macro_10=SWT21;RC;
Macro_11=SWT31;
Macro_12=SWT35;RC;
Macro_13=SWT39;
[KeyboardShortcuts]
F04=RigKbdCommand(13)
F03=RigKbdCommand(12)
F02=RigKbdCommand(11)
F01=RigKbdCommand(10)
Alt+K=ToolsCWToggleKeyboard
ESCAPE=MessageAbortTransmission
- - - - -


Thanks and Aloha,
Alan  AD6E / KH6TU