[WriteLog] Help with Ts 990s and Writelog - USB connection
Joe Subich, W4TV
lists at subich.com
Sun Jan 19 13:45:35 EST 2014
> (2) Are there any other settings I have to adjust to make it work
> with USB in the 990S?
Have you set the USB data rate in the TS-990 (7-01) to match the
baud rate in WriteLog? The TS-990 defaults to 115,000 bps for
USB and I don't recall that WriteLog will work that fast. Try
setting both to 38,400.
... Joe, W4TV
On 1/19/2014 12:36 PM, Rob Kaufmann wrote:
> Hello everyone,
> Santa apologized and dropped off my new Kenwood TS 990s on Monday. Yay!
> Using Writelog v 11.
> I’m trying to get it connected to Writelog. I am currently using a Yaesu
> FT 1000D and Microham USB II interface that works well with Writelog. The
> 990s has a USB out connector and RS 232 (DB9) in the back of the rig. (PC
> only has USB - no RS-232 DB9) I have plugged in the USB at the back of
> the 990 and the other end to the USB of the PC. The PC recognized the port
> and assigned it as Com 14. I’m trying to get the rig to respond but have
> had no luck.
> (1) There are no specific Kenwood 990s Settings (yet) for Writelog Will
> the Generic “Kenwood” setting do or do I have to use one of the other ones
> ( I believe the optiosn are Kenwood 850 and Kenwood 2000) ?
> (2) Are there any other settings I have to adjust to make it work with USB
> in the 990S?
> Thanks for any help . 73
> Rob VE4GV
> endoexperience at gmail.com
> WriteLog mailing list
> WriteLog at contesting.com
> WriteLog on the web: http://www.writelog.com/
More information about the WriteLog