[WriteLog] MMTTY separate temporary from WRITELOG

[Andre VanWyk]

I built an inexpensive keying interface for CW keying so use a separate COM port for CW. Rigblaster advantage does the rest. This way I have Writelog ready to work CW or RTTY without having to change anything. I minimize the RTTY screen until I need it.

73
NJ0F

Sent from my iPhone

> On Jan 21, 2014, at 12:00 AM, "Gary AL9A" <al9a at mtaonline.net> wrote:
> 
> Gilles,
> 
> If I understand your question correctly there may be a solution - use multiple writelog.ini files.
> 
> I have multiple .ini files setup for different mode configurations, I just give them a temporary name that makes them unique.  So I have a writelogcw.ini, a writelogrtty.ini and a writelogssb.ini.  When needed I merely rename the particular .ini file back to writelog.ini so the WL program will use the settings in that file.
> 
> For example, if you are running WL in CW and see a RTTY spot you can shut down the WL CW module, rename writelog.ini to writelogcw.ini and then rename writelogrtty.ini to writelog.ini.  Now your current ini file is configured for RTTY.  Open another WL module and it will come up configured for RTTY using MMTTY, or 2Tone, or a combination of MMTTY and 2Tone in various clone windows if that is what you have setup in that .ini file.  When done working the RTTY DX, merely reverse the process.  Close the WL RTTY module, rename the various .ini files back to their former state, and restart the WL CW module.
> 
> A bit cumbersome, but more efficient than reconfiguring all the port assignments, TU settings, etc.  I hope this is what you have in mind.
> 
> 73,
> Gary AL9A
> 
> -----Original Message----- From: G
> Sent: January 20, 2014 7:37 PM
> To: WRITELOG goupe
> Subject: [WriteLog] MMTTY separate temporary from WRITELOG
> 
> Sometime I browse on all HF bands for DX spots from web cluster sites.
> 
> My writelog is configured fo CW and if needed rapidely I close WL temporary
> and open MMTTY.
> 
> 
> 
> Can we configure MMTTY to have access temporary to com port setting,
> entering a com port, working on bands and when terminated removing those
> temp configurations & return to WL CW settings as it was ???
> 
> Gilles   VE2LX
> 
> =======================
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/ 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/