[WriteLog] MMTTY separate temporary from WRITELOG

[Joe Subich, W4TV]

> WL being hooked to MMTTY by MMTTY plugin we do not have access to com
> port in MMTTY to temporary configure it to RX on its com and TX on
> new com port.

That is not correct - one can set the port using the RTTYrite Port
menu and reinitialize the MMTTY plug-in if using the *old* SM6SRW
plug-in.  If using the new XMMT.OCX version of MMTTY, one can set
the FSK Port to *none* in the RTTYrite menu and select the port in
the MMTTY configuration dialog.

 > I use WL on com 1 for RX no TX and com 2 for TX.

I do not understand why you would use two ports for Writelog.  CW is
supported on the same port as radio control so one only needs two
ports for radio control, CW, PTT and RTTY.

73,

    ... Joe, W4TV


On 1/21/2014 11:31 AM, G wrote:
> I do not have and use winkey.
> I use WL on com 1 for RX no TX and com 2 for TX.
> I have one com port (com 1 as default on my desktop and I added another com
> port card with 2 com port ) so I have another free com port but WL being
> hooked to MMTTY by MMTTY plugin we do not have access to com port in MMTTY
> to temporary configure it to RX on its com and TX on new com port.
> I make that research because I would prefer not to buy another software.
> Gilles   ve2llx
> ===================
>
> -----Message d'origine-----
> De : WriteLog [mailto:writelog-bounces at contesting.com] De la part de Joe
> Subich, W4TV
> Envoyé : 21 janvier 2014 08:53
> À : writelog at contesting.com
> Objet : Re: [WriteLog] MMTTY separate temporary from WRITELOG
>
>
> One can do CW/PTT on the radio control port and free the separate CW port
> for FSK, use a K1EL WinKey (USB) for CW and PTT freeing a serial port for
> FSK (RTTY), or use AFSK *all* without the need to open/close a separate copy
> of MMTTY.
>
> 73,
>
>      ... Joe, W4TV
>
>
> On 1/21/2014 8:23 AM, john at kk9a.com wrote:
>> Why not add a second COM port exclusively for RTTY.
>>
>> John KK9A
>>
>>
>> To:	 "WRITELOG goupe" <writelog at contesting.com>
>> Subject:	 [WriteLog] MMTTY separate temporary from WRITELOG
>> From:	 G <rigel001 at sympatico.ca>
>> Date:	 Mon, 20 Jan 2014 23:37:37 -0500
>>
>> Sometime I browse on all HF bands for DX spots from web cluster sites.
>>
>> My writelog is configured fo CW and if needed rapidely I close WL
>> temporary and open MMTTY.
>>
>>
>>
>> Can we configure MMTTY to have access temporary to com port setting,
>> entering a com port, working on bands and when terminated removing
>> those temp configurations & return to WL CW settings as it was ???
>>
>> Gilles   VE2LX
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>