[WriteLog] Feature requests

[Kostas SV1DPI]

I would like so2v support for my markv also. I think there are many who 
have a 1000 radio even today...
Please add solution for cw direct keying (hi hi)... By the way I had 
problems the last weekend with a microham usbIII in pentium 4 computer 
without antivirus at all (but this is another story). I believe the 
packet window causes the problem.

Abt the (5) mouse. I always use mouse for rtty with writelog. As others 
said, left click on the left of a non-highlighted call and the call will 
be in entry window (until the first space). Then I press "Call" button 
to give the exchange. All the headlines over the entry window are 
buttons which can be programmed with a message (even different from F 
messages). Keep shift pressed and left click on a headline. A window 
pops up. Write your message and press enter. Voila...

73 Kostas SV1DPI

???? 16/7/2014 12:50 ??, ?/? Darren Collins (G0TSM) ??????:
> Writelog is still my preferred contest and DXped logger. Some things I 
> would like to see improved/added are:
>
> 1) Triggering of the FTDX5K's onboard DVK by the 'F' Keys. I thought 
> there was a workaround for this but cannot find it.
>
> 2) SO2V support for the FTDX5K. Like running 2 radios but the bottom 
> call entry field is for the 2nd-VFO.
>
> 3) Could the check call function be expanded to warn me if I have one 
> letter wrong in a suffix - a little tricky this one! But very handy 
> for running a weak pileup where you only get 3/4 of the call.
>
> 4) Better support for the IOTA contest. If I type in a DL call I would 
> prefer to see a list of DL islands and if I enter the wrong IOTA 
> reference I want an error message.
>
> 5) For RTTY I prefer to use the mouse to click on a decoded 
> highlighted call and then click on buttons to send the messages. I 
> don't think I can do this at the moment using MMTTY/MMVARI. I have to 
> click on a call and click on the call entry window to be able to use 
> the F keys. (although calls do not always highlight so I have to 
> manually type some of them into the call entry window). Also you can't 
> right-click on a string and grab that as a call.
>
> 6) Support for 24 channel MMVARI in RTTY. Open up the Rx filter, run 
> the pileup up split and let MMVARI decode the pileup, its amazing to 
> see and can give you an excellent DXPed run rate on RTTY.
>
> 7) Allow separate messages for RTTY in the CW/RTTY/SSB Memories. Yes 
> you can if you use the shift button but try pressing that down for a 
> few hours at a time. When I was going back to CW I was pressing the 
> wrong keys...
>
>  I know there are other programs that can run RTTY much better that 
> Writelog currently does but I do not want to have to keep swapping 
> programs, exporting the ADIFs etc.. Its a pain when you can be making 
> QSOs.
>
> Well, if you don't ask, you'll never get...
>
> 73 Darren G0TSM
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/