[WriteLog] Is anyone using an Icom IC-756 Pro III?

[Joe Subich, W4TV]

What connection are you using between the computer and transceiver?

Are you using a *real* CT-17 CI-V interface with a separate power
supply or are you using a third party device?  If you are using a
third party CI-V interface (converter) have to checked to determine
whether it needs power on the DTR and/or RTS lines?

If your interface is "port powered" make sure you are not using
PC Generates for CW on the same port as the radio and confirm that
you have no COM#_RTS_INIT and/or COM#_DTR_INI directives in
writelog.ini that apply to the radio port.

73,

    ... Joe, W4TV


On 3/6/2014 1:01 PM, w0ej wrote:
> Thanks Joe for the info. My rig communicates at 19,200 so when I installed
> WriteLog that is the baud rate I set the Port Setup for and verified in the
> INI file that I have 19,200,N,8,1
>
> It was suggested that I go to 9,600 so went into the rig program and changed
> to 9600,N,8,1  then went into WL and changed baud rate to 9600, saved
> settings and verified in the INI file that the comms are now 9600.  I then
> closed down WL, rebooted the rig then reopened WL with no joy.
>
> I then reset the rig and WL back to 19,200, I have five separate software
> packages that all successfully communicate with the rig at 19,200 and have
> been doing so for years. I'm not convinced something in the INI file is not
> correct hence my request to see how other's INI file is setup. That being
> said, I have two writelog.ini files which is confusing also. One in the
> writelog folder and one in the C:\Windows folder..
>
> Tnx agn 73,
>
> Bill - W0EJ
>
> NAQCC- #2271
>
> SKCC-  #10440T
>
> FISTS- #14786
>
> FPQRP- #2057
>
>