[WriteLog] Is anyone using an Icom IC-756 Pro III?

[Jerry Pixton]

Bob,
Could it be because the first Com5 line is broken - no equals?
Jerry, W6IHG

On 3/6/2014 4:23 PM, Bob-WB2COY wrote:
> Bill,
>
> Here is the portion of my Writelog.ini that pertains to the ICOM 756 
> ProIII....
>
> Caveats:
> I use different port numbers than you, so adjust accordingly. I use 
> COM5 for Radio Control via CI-V, COM4 for PTT and COM8 for FSK with a 
> TimeWave Navigator Interface.
> Make sure that the CI-V Baud Rate in the RIG matches the Baud Rate in 
> the ini file (I use 19200).
> Make sure that you haven't changed the CI-V address in the RIG (6Eh is 
> the default)
> Set CI-V Transceive in the Rig to OFF
> Set CI-V with IC-730 in the Rig to OFF
> Not sure why the COM5: setting is in the [RIGS] area twice, but it 
> works, so I left it alone...
>
> [PORTS]
> CommSlot1=5
> CommSlot2=6
> CommSlot3=7
> CommSlot4=8
> dvktype=1
> dvkport=4
> cwtype=1
> cwport=1
> dvkstoploop=1
> dvkechomic=1
> Comm5RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm5XmitControl=ALWAYS
> Comm5Used=USED,POLL,53
> CWPTTCONTROL=0
> CWPTTDELAY=0
> Com1:=9600,n,8,1
>
> [RIGS]
> Com5:19200,n,8,2
> Icom IC-756PROIII=0x6e
> Com5:=19200,n,8,2
>
>
> I only use the PRO-III for Digital modes, so anything in the ini that 
> has to do with SSB or CW or Voice Recordings is whatever the default 
> settings are.
>
> 73 -Bob, WB2COY
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> .
>

-- 
----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner
jpixton at shentel.net
----------------------------------------------