[WriteLog] RTTY %E Not Working

[Jeff Stai]

That would be it, I have seen the same thing. At least in SO2V with the K3,
Writelog does NOT remember the NO setting for the 2nd VFO. Every time you
start Writelog you need to check and make sure the COM/PTT setting. - jeff
wk6i


On Sat, Mar 8, 2014 at 2:07 PM, Ed Muns <w0yk at msn.com> wrote:

> Figured it out.  In the Setup/Ports window, Radio 2 COMM Port PTT was set
> to
> 'YES'.  Setting it to 'NO' seems to have fixed the problem.
>
> Ed
>
> Ed W0YK wrote:
>
> %E is not working when I send messages while transmitting SPLIT on the K3
> sub-receiver VFO.  IOW, the PTT is not dropped at the end of the message as
> it should with the %E parameter.  This function works fine when focus is on
> the main-receiver (non-SPLIT).
>
> This has worked for years, and it is a feature I use all the time in all
> contests.  But last night the problem appeared when focus moves to Radio 2,
> in this case the K3 sub-receiver which WriteLog puts into SPLIT mode.
>
> I've having a mental block as to what could cause this since PTT initiation
> works and the rest of the message parameters work fine, just not the final
> %E and only with focus on Radio 2.
>
> Any thoughts?
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>



-- 
Jeff Stai ~ wk6i.jeff at gmail.com
Twisted Oak Winery ~ http://www.twistedoak.com/
Facebook ~ http://www.facebook.com/twistedoak