[WriteLog] writelog cycled monitor tone

[G]

INFO NEED FROM 

icom ic-7600 users or other in this groupgoup

 

When I tune the radio on RTTY mode Writelog software closed there is a
steady tone eared from the monitor.

But if I open Writelog software the tone is cycled and at the same time the
red FSK led on the rigblaster Pro control box flash.

In the help file I found that configuration but it is’nt there by default so
I have to write it ?

 

COM1_RTS_INIT=-2

COM1_DTR_INIT=1

Is there some one has experimented the same thing and know for the ICOM- IC
7600 what to enter in the ini file to remove that problem ?

The radio with the WL software tune & transmit well but this cycled tone
should not stay like that.

 

Gilles   ve2lx

============== 

============================================

ANSWER

 

 

Hi Giles,

 

Yes - its almost certainly RTS or DTR issue.  You can modify the WriteLog
INI file to set RTS/DTR high or low at startup.  This is documented in the
WriteLog help files.  I can’t tell you what settings your rig needs, but if
you experiment with it, you can probably fix it with a specific
configuration.

 

Thanks,

 

Steve N9OH

 

On March 22, 2014 at 11:29:01 AM, G ( <mailto:rigel001 at sympatico.ca>
rigel001 at sympatico.ca) wrote:

=========================================== 

QUESTION 

De : G [ <mailto:rigel001 at sympatico.ca> mailto:rigel001 at sympatico.ca]
Envoyé : 19 mars 2014 23:16
À : 'steve at n9oh.com'
Objet : ve2lx writelog curious cycling tone during tunig

 

Hello Steve

I sent that remark in the pass ( When  I tune in RTTY mode if the Writelog
software is opened even if I keep the TRANSMIT button on, ((( theTUNING tone
as a continuous cycling audio tone – like bee bee bee bee over the tone )))
and the FSK red light flash on the RIGBLASTER control box ?

If I close The Writelog software it stop and I have a continuous tone ?

Would you have an idea why that happen ?

Is this cause buy a configuration in WL about RTS or DTR  or TXD or else ?

Gilles   ve2lx