[WriteLog] WL band plan

[Gary AL9A]

G,


Go to the WriteLog programs group and run the "Edit sub-bands" utility.  A 
small window will open for you to input the band ranges you need for CW, 
Digital and Phone.  Also check the WL Help manual section 'Editing 
Sub-bands' for instructions on how to use this utility if necessary.

73,
Gary AL9A

-----Original Message----- 
From: G
Sent: March 25, 2014 1:39 PM
To: writelog at contesting.com
Subject: [WriteLog] WL band plan

After reinstalled the software recently I found that the band plan for
Canada is gone naturally.

I do not recall at all how to configure it again

I erased all default band edge frequencies.

To make sure the good band edges wil appear in the band map I must reinstall
the band plan frequencies.



Can someone help me



Gilles   ve2lx

===================

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/