[WriteLog] unable to connect to local computers on network

[Gordon LaPoint]

Hi,
     I'm running version 11.22g and I am unable to get writelog to 
network.   I do the "tools-register to accept network connection" on the 
run computer
its set to name: n1mgo1   Letter is set to A
on the multiplyer computer I do the same except the name is different 
and the letter is B.
Then I do the "tools-link to network" on the multi station and enter 
'n1mgo1' for the name to connect to.  It says it connects, but nothing 
is updated for qso's .

If I go back to "tools-link to network" it says I'm allready connected 
to 127.0.53.53 and 127.0.0.1
n1mgo1 is at address 10.0.0.10  and multi cpu is at 10.0.0.11
I tried a different cpu on the network with the same results - connected 
but no updates and the same connected to ip addresses as above.
All cpus are running win7 home
I tried turning off the firewalls, rebooting connecting to a different 
computer,
I have run writelog for many years and this is the first time I have 
been unable to get the network up.

Gordon - N1MGO