[WriteLog] Win 10 - Issue w/CW via Serial Port

[Ron Lodewyck]

Hi Al,

I just finished installing a new Dell i7 desktop computer running Windows
10.  Writelog works perfectly including CW and RTTY (both MMTTY and 2Tone
working AOK).

I use an EdgePort USB to 4 COM port adapter which installed automatically
under Windows 10 with no special driver needed. I use homebrew keying
circuits like those on AA5AU's RTTY web site.

All in all, Windows 10 was easy to install on the new computer and fresh
installs of MMTTY, Writelog, 2Tone, DX Labs Suite, and WSJT-X (JT65/JT9)
all went smoothly and worked first try with my K3.

Let me know if I can help with any specific questions.  GL and 73,
Ron N6EE


On Tue, Aug 4, 2015 at 9:22 PM, Al Burnham (K6RIM) <k6rim at pacbell.net>
wrote:

> Just downloaded Windows 10 to my 64-bit PC and starting to learn the ropes.
>
> Only known issue, so far, is CW generation using Writelog (current
> version) and Logger32 (current version).
>
> I use the computer to generate CW. Radio is connected to computer via PCI
> serial card.
>
> CW generation has worked 100% using Writelog or Logger32 with all previous
> versions of Windows.
>
> I checked to see if there was a more current driver for the serial card,
> but it (supposedly) is current.
>
> The serial ports for radio control, rotor, etc. all work fine - but not
> for CW.
>
> Helpful suggestions appreciated.
>
> With thanks and 73,
>
> Al, K6RIM
>
> --
> Albert C. Burnham
> 45 Berens Drive
> Kentfield, CA 94904
>
> Cell: (415) 810-4839
> email: k6rim at pacbell.net
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>