[WriteLog] RTTY will not unkey after sending message macro

[Rich Hallman - N7TR]

Thanks for all of the quick replies....The issue was none of the lines had the %e at the end!  I knew it had to be simple...

Thanks again for all of the help...

73  Rich

-----Original Message-----
From: Richard Thorne [mailto:rthorne at rthorne.net] 
Sent: Friday, January 02, 2015 8:05 PM
To: Rich Hallman - N7TR
Subject: Re: [WriteLog] RTTY will not unkey after sending message macro

Do you have a %E at the end of the message, that stops the transmission.

Rich - N5ZC

On 1/2/2015 9:58 PM, Rich Hallman - N7TR wrote:
> Im new to writelog and hope this is a simple fix.
>
> I installed WL with MMTTY on a new computer.  I'm also using FSK Keying with a Rigblaster PLUS II USB on COM 13.
> When I installed WL with the MMTTYY plug-in as well.
>
> MMTTY works fine by itself and confirmed TX and RX is configured ok and works.  I also had it working on the same computer with WIN-TEST.
>
> I configured RTTYRITE for COM13 and used Software generate FSK DTR. I also set MMTTY FSK PTT Port to NONE so RTTYRITE had no conflicts.
>
> When I press F1 and sends the macro....all the data looks correct and the radio transmits the data.  But after sending the macro it never unkeys the radio unless I press ESC.  I also see the PTT LED stays lit and CW LED flashes on the rigblaster until I hit ESC. This happens for all of the function keys that transmit.
>
> What am I missing?
>
> Thanks...
>
> Rich N7TR
> ex KI3V, N3AMK, WB3JOV
> www.n7tr.com<http://www.n7tr.com>
> http://www.qrz.com/db/N7TR
> Telnet: dxc.n7tr.com N7TR DXCluster
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>