[WriteLog] Transmit problem with 2Tone/MMTTY

[joeduerbusch]

Thanks guys and to Keith for that tip on moving the filter.
What I did for rtty was to set mmtty for lowtones, 1445 and put net ON so
that MMTTY would send and Receive on the same frequency.
I am using Writelog, and I made an addition to the WL.ini file in the Rig
area:

COM7_DIGITAL_OFFSET_HZ= -1445

Com7 is my CAT control port, Writelog now shows the correct frequency.  I
can click on the spots from the bandmap and I qsy to the correct
frequency.  WL also log's the correct frequency.

I still have not gotten 2tone to work again.  I am using the old plugin of
MMTTY within WL and it works fine.  So not off the air.

I will let you know if I find anything.

Joe K0BX


On Tue, Jan 13, 2015 at 11:57 PM, Don AA5AU <aa5au at bellsouth.net> wrote:

> I think the key to this might be "when I uninstalled N1MM+". Perhaps when
> you uninstalled N1MM+ then you lost file XMMT.ocx since N1MM includes this
> file and I believe it gets registered when N1MM is installed but I'm not
> 100% sure on that.
>
> I'm not really sure how to correct this other than to try to put XMMT.ocx
> back on your PC and somehow get it re-registered with Windows.
>
> You may still already have XMMT.ocx on your PC because it is included with
> different software packages like DXLab Suite by AA6YQ . Search for it. If
> you can't find it, then you need to get it and put it back on your PC and
> try to get it re-registered.
>
> Information and instructions here:
>
>
> http://www.rttycontesting.com/tutorials/writelog/xmmt-support-for-mmtty-2tone/
>
> Let me know if you need any other help.
>
> 73, Don AA5AU
>
>
>
>   ------------------------------
>  *From:* joeduerbusch <k0bx at arrl.net>
> *To:* "writelog at contesting.com" <writelog at contesting.com>
> *Sent:* Tuesday, January 13, 2015 1:07 PM
> *Subject:* [WriteLog] Transmit problem with 2Tone/MMTTY
>
> Hi guys, the version of 2Tone and MMTTY that is used within Writelog has
> stopped xmiting
> any Tones.  I am using a Flex-6300 and have to use lowtones AFSK.
> Both 2Tone and MTTY copy OK but nothing on transmit.
> It was working until I uninstalled N1NN+.
>
> The MMTTY, FLdig, HRD standalone all work fine on both Xmit and Receive.
> I think that maybe I screwed up the path to the .ocx?
>
> Any suggestions?
>
> Joe K0BX
>
>
> --
>
> #1 Honor Roll Mixed
> Honor Roll RTTY
> 5BWAS
>
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without my permission.
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
>


-- 

#1 Honor Roll Mixed
Honor Roll RTTY
5BWAS

Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk)
without my permission.