[WriteLog] SO2R problem

[Rob K6RB]

Mike,

That did the trick. When I went to Radios, it showed 2 as selected 
(checked). But I selected 1, then verified it was 1; and selected 2, and 
verified that 2 was checked. And, it started working correctly. Thanks.

Rob K6RB


-----Original Message----- 
From: Mike Seguin
Sent: Thursday, July 23, 2015 12:48 PM
To: Rob K6RB
Cc: writelog at contesting.com
Subject: Re: [WriteLog] SO2R problem

I had the same thing happen when I just upgraded to the latest release.
As I recall, I reselected Radio | Number of Radios | 2 and things
started working again and have been fine.

Mike

---
73,
Mike, N1JEZ
"A closed mouth gathers no feet"

On 2015-07-23 15:29, Rob K6RB wrote:
> Yesterday my WriteLog app stopped supporting SO2R. It no longer
> switches between radio 1 and 2 when I press the up or down arrow keys,
> as it used to do. Before I started ripping into connection issues, I
> lit up N1MM+ and it works just fine. So, I know I have no problem with
> the K3s, DX Doubler, the COM adapters and the connections.
>
> I have not changed any of the port assignments, or any other
> parameters. I do see the emphasis switch from radio 1 to 2 when I
> press the arrow keys, but the sound of the relay is not present, and
> the TX LED on the DX Doubler does not switch – nor does the keyed
> radio.
>
> Any suggestions?
>
> Rob K6RB
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/