[WriteLog] WriteLog] RTTY issue Flex 6k and 11.28

Clay Melhorn n9io at hotmail.com
Sun Oct 11 23:32:53 EDT 2015


Joe K0BX,
Thought I would give you an update.
I updated to the FLEX 11.30 drivers, updated to WL 11.30 while I was at it.
I was prompted to update to a particular DirectX update before the drivers would work.
I thought I was sunk when it still did not transmit in the new RTTY mode in SSDR.
After a while I decided to let it go till morning.
After a decent night's sleep for a change I decided to reboot the PC even though I was not prompted to 
do so after the DirectX update so suddenly the RTTY mode shows as FSK and transmits to boot.
Should never had started this while tired and sleepy, mistakes and omissions occur.

Thanks again for your input Joe, see you in the contests.
Clay N9IO

Clay Melhorn N9IO Bonfield, IL
Webmaster: KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/

> Date: Fri, 9 Oct 2015 20:42:19 -0500
> From: n9io at hotmail.com
> To: k0bx at arrl.net
> Subject: Re: [WriteLog] WriteLog] RTTY issue Flex 6k and 11.28
> CC: writelog at contesting.com
> 
> TU Joe I appreciate the help.
> VERY happy to see WL support the Flex 6K radios.
> Clay N9IO
> Sent with my Kindle Fire HD
> Clay N9IO
> 
> joeduerbusch <k0bx at arrl.net> wrote:
> Clay, go to Writelog.com and download and install the WLFLEX11.30b driver.
> It will work with any version of WL from 11.01 on.  It has the RTTY Mode on
> it.
> 
> Joe K0BX
> 
> #1 Honor Roll Mixed
> Honor Roll RTTY
> 5BDXCC Plus 30,17,12
> 5BWAS
> 
> 
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without my permission.
> 
> On Thu, Oct 8, 2015 at 3:46 AM, Clay Melhorn <n9io at hotmail.com> wrote:
> 
> > Gents a little info please,
> >
> > The last version of Writelog I was able to download from this past year's
> > license was 11.28.
> > 11.28 will not transmit in RTTY, only in DIGL with MMTTY and Writelog and
> > SmartSDR 1.5.
> > I need to know if 11.29 or 11.30 will transmit in new RTTY mode within
> > SmartSDR 1.5
> > or must I still use DIGL?
> >
> > Thankyou in advance.
> >
> > Clay Melhorn N9IO Bonfield, IL
> > Webmaster: KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
 		 	   		  


More information about the WriteLog mailing list