[WriteLog] SO2R RTTY

[Gary AL9A]

Steve,

Is your radio 2 decode screen on the main monitor or an extended desktop 
monitor?  Clicking on a call in Rttyrite will only fill the Call field if 
the screen is on the main monitor.

If there is no room on your main monitor for the radio 2 decode screen, 
there is a work around.  Setup WL to display the call stack window.  Create 
two keyboard shortcut keys to Push calls to and Pop calls from the stack. 
When a call is highlighted in the Rttyrite window on the extended monitor do 
a right click on it.  That will Push it onto the stack - you can see the 
call in the stack window.  Now press the keyboard shortcut key you defined 
to Pop the call from the stack and it will populate the Call field.  Your 
normal macros will now send your exchange.

73,
Gary AL9A

-----Original Message----- 
From: Steve Colello
Sent: September 23, 2015 11:38 AM
To: Writelog
Subject: [WriteLog] SO2R RTTY

I have upgraded my computer from Windows XP to Windows 7 and over the course 
of a few months have gotten everything working FB. Setting up for the CQWW 
RTTY with SO2R, which worked great under XP, I came across a really funny 
situation. My run radio (radio 1) works great under RTTYrite  and my 
multiplier radio (radio 2) also works great except one issue. On the 
multiplier radio everything works except when a call appears highlighted in 
the RTTYrite box and I click on it, it does not put the call in the call 
box. If I right click on the call and send it to the band map for radio 2 
and then click on the call in the band map, it does populate the call box 
with the call. BTW, I am using XMMT. If I can’t figure this out, it is going 
to be a real pain S+Ping with radio 2.

Any ideas?

Steve
KA2KON
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/