[WriteLog] Windows XP

[ukbrown at aol.com]

  Good morning 
    I am still running XP with Writelog 11:32 but for some reason my device manager Resource code under LPT1 has changed.
 How do I get it to reset to the Direct I/O 378 and 37F code. That are needed. 
 I did find that those codes set up on my LPT3 printer port. 
 I am thinking this is my issue to get my cw keying and rig switching with the old DX Doubler Box back again.
 Any help is appreciated since I am not a computer person.
 Thanks as always. 
 K0UK 
bill brown


William L. Brown Insurance Services, LLC
   
2909 Four Corners Drive
   
Grand Junction, CO. 81503
   
970-245-8701 home and office
   
970-778-9900 cell phone
   
970-242-8343 fax
www.billbrowngj.com

Email  ukbrown at aol.com


   
"Working For You!"
   
 
   
  
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.