[WriteLog] WriteLog Digest, Vol 158, Issue 17

[Gary AL9A]

Nick,

I'm not sure on this one, but...

Are you using 2Tone for TX as well as RX?  If so I think the Insert key 
functionality to send the Call + Exchange may only work correctly in a MMTTY 
window.  I can't prove it at the moment as my MMTTY window under V12 has 
stopped highlighting calls in the MMTTY window.  Without the highlighting 
the Insert key won't function at all!  Both my 2Tone clone windows will 
highlight calls and I can populate the CALL field with a left mouse click, 
but then must use the Enter key to send the Call + exchange.  Also this 
morning with the "Minor Radio Blackout" conditions I am unable to hear any 
RTTY signals so I can't play around with making changes to see if they work.

You might try opening up a MMTTY window and use that as your TX window 
instead of 2Tone to see if the Insert key functionality returns or not.

73,
Gary AL9A



-----Original Message----- 
From: Nicholas Smith
Sent: Friday, February 12, 2016 9:46 AM
To: writelog at contesting.com
Subject: Re: [WriteLog] WriteLog Digest, Vol 158, Issue 17

Gary, this is the situation:

When is it you are pressing the Insert key?  Is is to capture a highlighted
call from the Rttyrite window, populate the CALL field and then send your
exchange? YES

I am using 2Tone and it is highlighting the call sign, but insert will sent 
the exchange but will not put the call in the window, thus no callsign is 
sent.
Very confusing and frustrating.

Thanks Gary hope we can get this corrected.
73,
Nick
w4gkm



On 2/12/16 11:00 AM, writelog-request at contesting.com wrote:
> When is it you are pressing the Insert key?  Is is to capture a 
> highlighted
> call from the Rttyrite window, populate the CALL field and then send your
> exchange?

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/