[WriteLog] Version 12 question

[Courtney Judd]

set mine to 100, you can always click on save at any time and the count 
will start from there Cort K4WI

> john at kk9a.com <mailto:john at kk9a.com>
> Thursday, January 21, 2016 9:11 AM
> If you make a lot of QSOs, I would not set the count to 1.
>
> John KK9A
>
>
> To: "WriteLog" <writelog at contesting.com>
> Subject: Re: [WriteLog] Version 12 question
> From: "Gary AL9A" <al9a at mtaonline.net>
> Date: Wed, 20 Jan 2016 09:37:34 -0900
>
> Rob,
>
> I don't have V12 yet, need a new computer first :). But, I think these
> will still work in V12.
>
> In your [Configuration} section of writelog.ini add the following -
>
> AutoSaveCount= 1
>
> >From the Help manual - "Set AutoSaveCount to the number of QSOs allowed
> between automatically saving the log. Set this to -1 and WriteLog will not
> autosave. If you make no entry here, WriteLog will auto-save after every
> 100 QSOs."
>
> As for the default CW speeds, go to Setup/Ports and then click on the CW
> Speeds tab. In the table of CW speeds set the left most window on the
> second row to your default speed. This should then show up as the default
> when you start WL. You will probably have to do this for both radios.
>
> 73,
> Gary AL9A
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>