[WriteLog] Baffling Sound Issue

[Joe Subich, W4TV]

Audio is handled by Windows - always -

Windows maintains a *separate* level for every audio endpont and every
application.  Open the Windows Volume Mixer, select the device being
used by WriteLog ("Headset Earphone (microHAM CODEC)" in this case),
cause *WriteLog* to play the wave file and adjust the *WriteLog* slider
(playback level) in Windows Volume Mixer.

Make sure you have performed the "Setting Audio Levels" procedure in
the microKEYER II Users Manual *again* if you have installed a new
operating system (or even restored a previous operating system) before
setting the WriteLog playback levels.

73,

    ... Joe, W4TV



On 7/31/2016 10:29 PM, Bob Garrett wrote:
> Greetings,
>
>
>
> A long weekend of upgrading to Windows 10 and back to Windows 7.  Everything
> is working under Windows 7 except my WriteLog .wav files for SSB contests
> are almost inaudible.  Somewhere, I assume the volume is at 0 but, try as I
> may, I can't find that setting.  Any help appreciated.  A tad frustrating to
> say the least.  The only things that changes were the upgrade to Windows 10
> and rolling it back to Windows 7.  Now the audio is very weak.  At first, I
> had all the audio going to the computer speakers and the audio level was FB.
> Now I managed to switch to the rig but the audio is very very low.  Any help
> appreciated.
>
>
>
> Using Micro Ham MK ii, FTDX5000 and the most recent version of WL.  73, Bob
> K3UL
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>