[WriteLog] ARRL VHF Contest issues - SOLVED

[Don Hill AA5AU]

In order for six meter spots to show "not red" or "not out-of-band" in the
Packet Spots window, I had to create sub-bands for six meters in both the
SSB and Phone sections using Edit Sub-bands.

I guess I've never used the Packetcluster in this contest before. Not sure
why because it is permitted by all entries from what I read in the rules.

Don AA5AU

-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Don
Hill AA5AU
Sent: Sunday, June 12, 2016 1:40 PM
To: writelog at contesting.com
Subject: Re: [WriteLog] ARRL VHF Contest issues

I don't get any Packet spots in the Packet Spots window until I un-check
"In-band Only". Since there is no six meter band in "Edit Sub-bands", then I
guess this is why the spots are showing out of band. Don't know how to
correct it.

Don AA5AU

-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Don
Hill AA5AU
Sent: Sunday, June 12, 2016 9:58 AM
To: writelog at contesting.com
Subject: [WriteLog] ARRL VHF Contest issues

Operating on six meters and have 50 MHz set in the Packet Spots window but
all the calls are showing red with an X like it's out of band.

Also, when clicking some calls in the CW portion of the band on the bandmap
causes the mode to change to RTTY.

Using the ARRL VHF QSO Party module. Not even sure if that is correct but
didn't see anything else that might be for this contest.

Any ideas?

73, Don AA5AU

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/