[WriteLog] MMTTYPlugin for Writelog problem

[Joe Subich, W4TV]

It's been a while since I checked XMMT.ocx with Writelog.  However, I
*believe* a quick and dirty way to prevent it from dumping the entire
macro into the receive buffer at one time is to set MMTTY's "TX Port"
(MMTTY -> Option -> Setup -> Misc tab) for "Sound + COM TxD".

That will cause MMTTY to pace the output to the sound card even if you
are not using the sound card for transmit.

You can also use MMTTY to generate FSK (Port = None in Rttyrite) then
set the PTT & FSK port in MMTTY and engage pacing in MMTTY (click the
"USB Port" button on the "Misc" tab and select "C: Limiting Speed".
Again, MMTTY will pace out the data rather than dumping it all at once
into the RX buffer

73,

    ... Joe, W4TV


On 11/1/2016 9:46 AM, Don AA5AU wrote:
> Joe, is what you are saying is that when using XMMT.OCX that when you transmit a message that all of the message scrolls out on the screen at one time? This should not be happening. How are you set up to transmit? If you are using FSK, you can try setting "Software-generated to on" to see if that helps. You can use "Software-generated FSK" even though you aren't using a USB-to-serial adapter.
> http://www.rttycontesting.com/tutorials/writelog/software-generated-fsk/
>
> I think others have had the issue of the entire message scolling out all at one time but I don't know what the solution is.
> I just tried installing the plug-in on my Windows 10 machine and get the same message. I searched the WriteLog reflector archives and did not find any matches to "Writelog must be installed". So I don't have any answers for not being able to install the MMTTY plug-in. Looks like it's broken.
> What version of WL do you have installed on  your other Windows 10 machine?
> 73, Don AA5AU
>
>
>       From: joeduerbusch <k0bx at arrl.net>
>  To: "writelog at contesting.com" <writelog at contesting.com>
>  Sent: Monday, October 31, 2016 3:17 PM
>  Subject: [WriteLog] MMTTYPlugin for Writelog problem
>
> Hi I just got a new laptop running windows 10.
> I am running WL v1208c .
> I am trying to install the MMTTY Plugin.  I am getting an error message
> saying:
> "Writelog must be installed!"  ?
> Now before you say it, MMTTY.OCX works fine, I know it is there.
> The reason I want the old Plugin is that the character showed on the screen
> in sync with the monitor tones.
> On MMTTY.OCX the Whole Macro is displayed, and then you have listen to the
> audio to know when it is finished sending.
> I have been on RTTY for 40 years now, Listening/and watching the two
> together just seems right.
>
> BTW on my other Win10 Computer, the plugin works fine.
>
> Joe K0BX
>
> #1 Honor Roll Mixed
> Honor Roll Phone
> Honor Roll CW
> Honor Roll RTTY
> Honor Roll 20 Meters
> 5BDXCC Plus 30,17,12
> 5BWAS
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>