[WriteLog] Mystery CW Speed

[john at kk9a.com]

I use the Winkeyer potentiometer to set the speed, I have not used the PgUp PgDn method in years.  

 

John KK9A

 

From: joeduerbusch at gmail.com [mailto:joeduerbusch at gmail.com] On Behalf Of joeduerbusch
Sent: Tuesday, November 29, 2016 12:47 PM
To: john at kk9a.com
Cc: writelog at contesting.com
Subject: Re: [WriteLog] Mystery CW Speed

 

I have the same problem.  The CW speed was reset to the speed of the Winkeyer.  

There is a checkbox in Writelog under CW to "ignore Winkeyer speed pot."

 

I hope this helps

 

Joe K0BX




#1 Honor Roll Mixed
Honor Roll Phone
Honor Roll CW
Honor Roll RTTY
Honor Roll 20 Meters
5BDXCC Plus 30,17,12
5BWAS

 

 

On Tue, Nov 29, 2016 at 5:05 PM, john at kk9a.com <john at kk9a.com> wrote:

There is not enough information in your post. What are you using for an
interface - how are you generating CW?

John KK9A


To:     <WriteLog at contesting.com>
Subject:        [WriteLog] Mystery CW Speed
From:   "Jim" <ks1j at arrl.net>
Date:   Tue, 29 Nov 2016 03:04:32 -0000


I'm running Writelog 12.08E.

Half way through the CQWW I experienced a strange behavior. I would send
CQ at
say 34 wpm and randomly the CW speed would drop to 25. PGUP would increase
the
speed but as soon as I left the PGUP key, the CW Speed would drop again but
maybe to 27 wpm.

A later restart of Writelog seemed to correct the issue.

Any ideas?

Jim KS1J

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/