[WriteLog] beta WriteLog/Flex-6000 series driver

[Steve AI9T]

Rich

The 6700 only does AFSK.

Steve AI9T


On 11/27/2017 10:04 PM, Richard Thorne wrote:
> Steve,
>
> I've been playing with my setup for quite a bit this evening.  I can 
> receive fine I just can't transmit.
>
> The rig is keying and the MTTY  control panel show's a diddle, it's 
> just not making it to the transmitter.
>
> I'll keep playing with it, once I get it figured out I'll let you know.
>
> I'm curious, why are you running AFSK vs FSK?
>
> Rich - N5ZC
>
> On 11/27/2017 9:12 AM, Steve AI9T wrote:
>> Hi Rich
>>
>> I have a couple questions for you regarding the Flex setup. I started 
>> using N1MM a while ago but thought I'd give Writelog another try.
>>
>> I was running V12 when I quit paying for updates but last week I 
>> decided I would renew and Pay up.
>>
>> I have it setup for SO2R RTTY. Using a 6700. I have it working OK but 
>> have a couple issues. Running AFSK how do you increase the audio 
>> output? I'm not driving it quite hard enough and without DAX I can't 
>> figure out how to raise it.
>>
>> Secondly, if I try to do TX lockout Last one wins it quits TXing and 
>> I have to uncheck the lockout setting to get it to TX again.
>>
>> Thanks
>>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

-- 
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)