[WriteLog] RTTY in latest update?

[Joe Subich, W4TV]

On 4/10/2018 10:19 AM, Don AA5AU wrote:
 > EXTFSK is not used with WriteLog.

*NOT TRUE!*  EXTFSK/EXTFSK64 can be used if one sets the
FSK Port in the RTTYrite menu to NONE and use the OCX
driver.

The example, using EXTFSK/EXTFSK64 with MMTTY in WriteLog,
can be found in the example configuration for microHAM USB
Interface III and WriteLog:
   <http://www.microham.com/Downloads/U3_WriteLog_Setup.pdf>
see page 3.

73,

    ... Joe, W4TV


On 4/10/2018 10:19 AM, Don AA5AU wrote:
> EXTFSK is not used with WriteLog. If you are using MMTTY, you must set the FSK port in the Rttyrite port menu. If you have to use EXTFSK with MMTTY, then you should use "Software-generated FSK" in WriteLog.
> Hope this helps.
> Don AA5AU
> 
>        From: Stein-Roar Brobakken <post at lb3re.com>
>   To: writelog at contesting.com
>   Sent: Tuesday, April 10, 2018 6:56 AM
>   Subject: [WriteLog] RTTY in latest update?
>     
> Hello
> 
> My XMMT / mmtty setting will not diddle after latest update.
> 
> I tried mmtty directly and it works.
> 
> I set EXT64, Xmmt and settings to both a comport and also to EXTFSK.
> 
> Nothing happen
> 
> Best Regards,
> Stein-Roar Brobakken
> LB3RE K3RAG
> www.lb3re.com
> post at lb3re.com
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 
> 
>     
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>