[WriteLog] How to define default CW speed to be stored at start up, in ini file?

[Randy Thompson K5ZD]

I have been using WL since 1999 (not sure what version that was).  My CW always defaults on start-up to the value that is in the first box of the second row of the CW Speeds Dialog.

What device are you using to do the CW keying?  Perhaps it is not being commanded correctly on startup.  I have been using the W5XD Keyer and now the MicroHam MK2R+.

Randy K5ZD


> -----Original Message-----
> From: WriteLog <writelog-bounces at contesting.com> On Behalf Of Steve Lund
> Sent: Thursday, April 12, 2018 4:18 PM
> To: Craig KØCF <k0cf at mchsi.com>
> Cc: writelog at contesting.com
> Subject: Re: [WriteLog] How to define default CW speed to be stored at
> start up, in ini file?
> 
> That didn't work for me with 12.09F.
> 
> It always starts with 16 wpm, even if that is not one of the available
> speeds.
> 
> What version are you using?
> 
> Steve, K6UM
> 
> On Wed, Mar 28, 2018 at 7:07 PM, Craig KØCF <k0cf at mchsi.com> wrote:
> 
> > Kari,
> > Open the Setup menu, then choose "Ports...". In the dialog that comes
> > up, use the left-right arrows in the top right corner to scroll to the
> > right until you can see the tab "CW Speeds". Select it. You will see a
> > grid of all the CW speeds. You can set these to whatever you like, but
> > the first one in the second row is the default speed. Mine is set to
> > 28, and my range of speeds is from 12 to 42 WPM in 2 WPM increments,
> > e.g. 12, 14, 16... 28,30,32...
> >
> > Your preferences may vary!
> >
> > 73, Craig, KØCF
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 27 Mar 2018 18:41:51 +0200
> > From: "Kari Gustafsson" <kari at sm0hrp.se>
> > To: <writelog at contesting.com>
> > Subject: [WriteLog] How to define default CW speed to be stored at
> >         start up, in ini file?
> > Message-ID: <000001d3c5ea$822f8d90$868ea8b0$@sm0hrp.se>
> > Content-Type: text/plain;       charset="us-ascii"
> >
> > Hi,
> > Anyone know how to define the default CW speed at start up so one has
> > not to do it all over every time you launch WL?
> >
> > I run SO2R so doing it on both radios would be attractive.
> >
> > 73s Kari SM0HR
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/