[WriteLog] Fwd: Icom IC7610 RTS PTT

[Jon Suehiro]

In my initial setting, I got the same situation --- continuous PTT key down.

Then I changed to

USB Send/Keying	USB Send	USB1(B) RTS
			USB Keying (CW)	USB1(B) DTR
			USB Keying (FSK)	USB1(B) DTR

Try (B) if you are currently using (A), the issue was solved in my case.

73 de Jon NN5T


-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of Jim
W7RY
Sent: December 17, 2018 20:26
To: writelog at contesting.com
Subject: [WriteLog] Fwd: Icom IC7610 RTS PTT

I tried to put in a screen shot but they are not allowed on this antiquated
list format...

Thanks
73
Jim W7RY

---------- Forwarded message ---------
From: Jim W7RY <jimw7ry at gmail.com>
Date: Mon, Dec 17, 2018 at 1:59 PM
Subject: Icom IC7610 RTS PTT
To: <writelog at contesting.com>


Seems to be some sort of issue with PTT using RTS with the ICom IC7610.

When you set it up like below, the radio is in constant PTT.
You have to un-check PC generates PTT to keep it from transmitting.

PC generates CW works fine on  DTR. But some issue with PTT on RTS.
The radio keyes up fine in RTTY mode even without all mode PTT turned on
and com PTT set to NO. Not sure how the radio transmits in RTTY mode. Must
be a radio command?

Thanks!
73
Jim W7RY
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/