[WriteLog] Problems with 12.34K2

[Randy Thompson K5ZD]

You need to start by troubleshooting the rig communication.  Everything else
is a symptom of that.

Check the ports and make sure you have the right radio on the right port
with the right baud rate.

> -----Original Message-----
> From: WriteLog <writelog-bounces at contesting.com> On Behalf Of James Brown
> Sent: Saturday, November 17, 2018 9:12 PM
> To: writelog at contesting.com
> Subject: [WriteLog] Problems with 12.34K2
> 
> Fired up the new version for Sweepstakes.
> 
> Have all sorts of problems.
> 
> -will not recognize the rig.  says "no rig"
> 
> -there is a red B after each sequence number entry in the log
> 
> -an entry in the QSO entry box no longer self-deletes when tuning away
> from the frequency
> 
> -the band map disappears after coming out of the setup ports screen
> 
> 
> Tried reinstalling.  No luck
> 
> Tried rebooting PC.  No luck
> 
> Read something about going back to the last "full" version install, then
> trying to reinstall 12.34K2  Do not know exactly what that means, and not
> sure what the last "full" version was.
> 
> Have been using Writelog for many years and never had problems like this.
> 
> Suggestions?
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/