[WriteLog] [RttyDigital] No signals showing in DigiRite Receive

[Gordon LaPoint]

Don,
    Changed the size of the DigiRite Receive window and the waterfall 
showed up!!
So now I know what to do if it happens again.
Gordon - N1MGO

On 12/4/2020 8:57 AM, Don AA5AU wrote:
> Check your sound card settings in "sound board mixer control" under 
> the WriteLog program group in the Start menu.
>
> Don AA5AU
>
> On Friday, December 4, 2020, 03:28:35 AM CST, Gordon - N1MGO 
> <gordon.lapoint at gmail.com> wrote:
>
>
> I have DigiRite V 2.2.2.11 - built by AA5AU installed with WriteLog
> V12.54A.  Its decoding signals just fine but I have a blank waterfall,
> with one pixel line at the top that is showing signals, what do I have
> set wrong?
>
> Everything else seems to be working, and I used this setup last year for
> the FTRoundup without problems.
>
> Thanks,
>
> Gordon - N1MGO
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#1370): 
> https://groups.io/g/rttydigital/message/1370 
> <https://groups.io/g/rttydigital/message/1370>
> Mute This Topic: https://groups.io/mt/78692312/361772 
> <https://groups.io/mt/78692312/361772>
> Group Owner: rttydigital+owner at groups.io <mailto:owner at groups.io>
> Unsubscribe: 
> https://groups.io/g/rttydigital/leave/3491136/344552604/xyzzy 
> <https://groups.io/g/rttydigital/leave/3491136/344552604/xyzzy 
> >[aa5au at bellsouth.net <mailto:aa5au at bellsouth.net>]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>