[WriteLog] Rig is keyed at Writelog startup

[Jon Suehiro]

Jim, you are selecting the wrong port for CW keying.

TS-890 MENU -> see the right sidebar -> ADV. (if you don't see, press MORE)
->  17. ~ 20.

Tinker where CW keying is correctly working and not stay keyed.  Same for
RTTY FSK keying and DATA mode keying (test with WSJT-x ?).

These menu controls for CW Keying, RTTY Keying, PTT and DATA SEND (PTT for
the data mode).


GL de Jon NN5T


-----Original Message-----
From: WriteLog [mailto:writelog-bounces at contesting.com] On Behalf Of James
Brown
Sent: March 30, 2020 19:02
To: writelog at contesting.com
Subject: [WriteLog] Rig is keyed at Writelog startup

Still wrestling with the TS890 being keyed into xmit and the sidetone
coming on and running constantly when writelog starts up.   The rig is
keyed into xmit only if rig is in the cw mode, but the sidetone still comes
on and runs constantly and is audible in all modes.

I posted on this yesterday, but did not realize that the rig was actually
being keyed.  This was because I did not have the vox turned on, which is
necessary to send cw.

I think there were a few suggestions posted, but somehow I managed to lose
these, and cannot recall what they were.

It does not matter whether the paddle is plugged in or not.

Suggestions?


Jim   W4LC
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/