[WriteLog] RU problem

[Jim]

Someone learned a lesson... Which is.... NOT to perform a software 
upgrade of a perfectly working piece of equipment right before a big 
contest.

Sorry for your difficulties. I can't offer more. Sorry.


Thanks
73
Jim W7RY

On 1/3/2021 3:23 PM, Courtney Judd wrote:
> This week end turned into a really head scratcher for me. First I am 
> using FTdx5000MP, KPA-1500, microHam Keyer2 with software being 
> general logging=DX4WIN(9.0.9.1259)+MMTTY, contesting= 
> Writelog(12.44)+MMTTY, router (9.3.4) and WIN 10 pro. This combination 
> worked flawlessly up to Friday when I saw that Elecraft did a firmware 
> update for the KPA1500 to Ver 2.48 which I did.... what possibly could 
> go wrong... yeah! Everything works as it should with DX4WIN but 
> Saturday I started the contest with Writelog and that's when I 
> discovered the amp no longer wanted to follow the rig. I went thru 
> everything in Writelog and the menu in the KPA1500. But when I change 
> bands by button push on the 5000 the amp starts flipping back and 
> forth. In Writelog PORTS menu I unchecked POLL for the rig and that 
> seemed to help but then the rig no longer changed freq with the dial. 
> Just couldn't sort this out so closed Writelog and opened DX4WIn.... 
> everything works like normal.... amp follows rig as usual.... went 
> back to Writelog and same problem. There is no difference in the 
> Router software for either program so what is different? Any 
> ideas/suggestions? Thanks and 73's Cort K4WI
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/