[WriteLog] Help on 7610

[Rich]

I do not believe there is a 9 pin din on the radio.   There should be 
either one 13 pin jack or an 8pin and a 7 pin.  Icom has used the same 
wiring forever.  The FSK should be on Pin 1 of the 8pin jack.   The USB 
jack would only be used for AFSK keying.  He mentioned in his email to 
you TINYFSK.  That module is for the MORTTY device.   He does not need 
to use TINYFSK.

You stated that he has a real comport on his PC not USB to Serial converter.

For FSK keying............

The radio should be in RTTY mode.

In WL RTTYrite select the appropriate comport # and Hardware FSK

He should be good to go

On 3/9/2021 17:30 PM, Nick Smith wrote:
> My friend just purchased a IC-7610 and cannot get it to key the radio 
> with Writelog and of course diddle. He is using a serial port for 
> communication and the same device that was used on his other Icom. Is 
> there a setting on the radio to differentiate between the usb and the 
> nine pin din on the back of the radio.  I am not familiar with this 
> radio and we need some help, we have tried everything I know about 
> Writelog and cannot get it to work. He has the latest version of WL.
>