[WriteLog] Remote control bandmaps not showing [SOLVED]

[Jamie Dupree]

I went back into my shack notes and found that I had trouble with bandmaps in the past which were 'greyed out.'
I fixed it by re-installing Writelog.
And that worked for the Writelog Remote issues as well.
Thanks to those who took time to email.
73 Jamie NS3T


-----Original Message-----
From: Jamie Dupree via WriteLog <writelog at contesting.com>
To: writelog at contesting.com <writelog at contesting.com>
Sent: Mon, Feb 28, 2022 10:21 am
Subject: [WriteLog] Remote control bandmaps not showing

I must be doing something wrong somewhere, so maybe someone can help point me in the right direction.
I connect to my shack using WL Remote Control with no problems.  It took a while, but I finally figured out the specific rig control / PTT settings, etc. for CW/SSB and it works great.  The audio connection is absolutely fantastic.  I can key the rigs, send CW, use recorded voice files, and all works exactly as it would in the shack.
BUT my bandmaps don't show anything.  They stay gray.  I don't get to the point of an empty bandmap with a black background and the frequency hashmarks.
I can still bring spots in via telnet and the packet window - so I can see some of them.  I can even scroll through available spots using keyboard shortcuts.  But I'm doing it blind, as nothing shows up on the bandmap.  The bandmaps remain greyed out.
I don't know if this is linked, but the 'Bandmap on secondary VFO' choice is greyed out (even though I obviously have a second VFO on my rigs).
Any ideas?  Thanks.

73 Jamie NS3T

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/