[WriteLog] IC-9700 Connection via USB Times out in about 10 seconds

[Mike Seguin]

the latest versions of Writelog do use ini files. To access them, you 
select import/export from the opening window that pops up when you start 
Writelog.

On FT8, if you use WSJT-X, you can use the WritelogADIlistener app to 
log contacts. Or a better was is to use DigiRite from within Writelog. 
That way it's fully integrated and knows mults/dupes because it's using 
the Writelog log file.

On my 9700, I use the USB connection for the audio codec and have a USB 
to CI-V cable plugged in to Remote for CAT. Rock Solid.

Mike

On 9/8/2022 7:53 PM, k3sk at buckwalter.co wrote:
> The later versions of Writelog do not have/use an INI file.
> 
>   
> 
> This is disappointing for me.   I've used Writelog since back pre-version 8.   I love how it handles multiple rig inputs for VHF contests.  There is so much FT8 activity on VHF now,  to contest and not be able to work/log FT8 contacts is nearly as bad as not operating at all.    I may have to consider other contest logging options.
> 
>   
> 
> de K3SK
> 
>   
> 
> -----Original Message-----
> From: WriteLog <writelog-bounces at contesting.com> On Behalf Of Jay
> Sent: Thursday, September 8, 2022 6:41 PM
> To: writelog at contesting.com
> Subject: Re: [WriteLog] IC-9700 Connection via USB Times out in about 10 seconds
> 
>   
> 
> When you first go into Writelog on the right hand side you can EXPORT the INI file.
> 
>   
> 
> Two things.
> 
>   
> 
> 1. The USB Cable must be very short -- this is an Icom problem.
> 
> 2. In the [RIGS] section
> 
> Com3:=19200,n,8,2                 Com port that you are using BUT 2 Stop bits.
> 
>   
> 
>   
> 
>   
> 
> On 9/8/2022 3:03 PM,  <mailto:k3sk at buckwalter.co> k3sk at buckwalter.co wrote:
> 
>> HELP !!!   VHF Contest is only 1-1/2 days away and I can't get my IC-9700 to
> 
>> stay connected to Writelog.    I had version 12.6 and it wouldn't work, so I
> 
>> purchased the latest (v12.66) and it still don't work.
> 
>>
> 
>> When I configure the port settings in WL it connects, and the radio's
> 
>> frequency and mode are displayed at the QSO entry window and follow manual
> 
>> radio tuning as it should.  But after about 10 seconds, the QSO Entry window
> 
>> changes to "No Rig".   I've tried several different baud rates with no
> 
>> difference in the issue.
> 
>>
> 
>> The radio is set to the default address, A2H and I don't see where I can
> 
>> check or change that in WL.
> 
>>
> 
>> de K3SK FM07
> 
>>
> 
>>
> 
> _______________________________________________
> 
> WriteLog mailing list
> 
>   <mailto:WriteLog at contesting.com> WriteLog at contesting.com
> 
>   <http://lists.contesting.com/mailman/listinfo/writelog> http://lists.contesting.com/mailman/listinfo/writelog
> 
> WriteLog on the web:   <http://www.writelog.com/> http://www.writelog.com/
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

-- 
73,
Mike, N1JEZ
"A closed mouth gathers no feet"