[WriteLog] help again

[Jim Iori]

On the FTDX-101, press and hold Preset, it will bring up the preset 
settings for the mode your currently selected.

Check the settings, especially the CAT RTS, and the RPTT select.

Then correct those to get the "no rig" and cw keyboard to work .

This should get you going.

Jim / NU4Y

On 2/15/2025 16:24, Courtney Judd wrote:
> well last week end had issues with the rtty test and now same stuff 
> going on with arrl CW.... FTdx101MP with latest writelog and win 10 
> computer. I have two ports COM 5 enhanced for rig control and Com 4 
> standard port for keying. With the PRESET button turned on I get 
> frequency readout of the radio but only single carrier in TX from F 
> keys... with Preset off I get no frequency readout "no rig" and Normal 
> sending of F key messages. What or where do I look to get these two to 
> play nice. Ports in Device Manager show all working. Set up in 
> writelog is as usual. Any ideas? thanks 73's Cort K4WI
>
> Sent from Postbox <https://www.postbox-inc.com>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/