[WriteLog] clicking on bandmap fails to change frequency in CQ WW VHF on 6m
Don AA5AU
aa5au at bellsouth.net
Sun Jul 6 18:23:22 EDT 2025
My original post to the reflector did not go through because I had a screenshot embedded with the message. So here is the message without the screenshot.
I am reporting that clicking on a spot on the bandmap (at least on CW), causes the 7300 to QSY to the spot. It works for me.
Don AA5AU
On Sunday, July 6, 2025 at 07:39:02 AM CDT, Don AA5AU <aa5au at bellsouth.net> wrote:
Hi Curt. I just tested clicking on a callsign on the bandmap using the CQ WW VHF module while on 6 meters using an IC-7300 and it works fine in WriteLog version 12.88E. What version are you using? It probably shouldn't matter. It should be working.
My IC-7300 is on USB COM port 5 and I'm using a Mortty for CW on COM port 6.
<screenshot missing>
If you still don't have it working, the only thing I can think for you to do is to reinstall the latest version of WL that you have. You don't have to uninstall anything. Just re-run the installation program and restart your PC. There have been times when the bandmap didn't work right and I've had to reinstall WL. Usually that involves the bandmap being blank. I don't recall having the issue you are reporting.
73, Don AA5AU
On Saturday, July 5, 2025 at 09:39:35 AM CDT, Curt Kolovson <ckolovson at gmail.com> wrote:
Hi Guys,
I'm using an ICOM 7300. I believe I have my ports set up correctly for rig
control using CI-V on the 7300. I can type in a freq in the entry window
and it will QSY to that freq. But clicking on the bandmap has no effect.
Any idea what might be wrong? Thanks in advance.
73 OMs de Curt W6RQ
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
More information about the WriteLog
mailing list