[WriteLog] SSB Wav file messages

[Rich]

So problem resolved.

No issue with WL settings.

I would say the FTDX10 is a bit weird how it handles this but it works.

This will not work if you use the rear panel for your footswitch, the 
footswitch must activate the PTT via the RJ45 or you will not get any 
audio from your mic when you speak into it.

FTDX10 Menu:

RADIO SETTINGS

MODE SSB - SSB MOD SOURCE - REAR

REAR SELECT - USB


On 7/26/2025 4:48 PM, Don AA5AU via WriteLog wrote:
>   Hi Rich. I had the same issue earlier this year and the problem was a setting in my IC-7610. What radio are you using?
> In my '7610, and I assume the '7300 too, change MOD INPUT > DATA OFF MOD to MIC, USB.
> Thanks to Joe, W4TV, for his input on this.
> Don AA5AU
>      On Saturday, July 26, 2025 at 11:22:12 AM CDT, Rich via WriteLog <writelog at contesting.com> wrote:
>   
>   I am having trouble getting my WAV files to play.
>
> I think the main issue is the audio path from Win11 to the radio.
>
> I am assuming that the audio path to use would be via the USB codec for
> the radio.
>
> I have studied the manual and still cannot get the files to play.
>
> I think the files are playing, the radio is keying, but no audio.
>
> I have played the WAV files directly in Window Media player and they are
> fine.
>
> Any ideas?
>
> Rich
>
> K3RWN
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>    
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/